NEW PRODUCT ALERT! Check out our latest release of the X64 HD Sewage Pumps!

X

6160 Series

Commercial Duty Pumps

6160 Series

Commercial effluent pumps

Features and Benefits

  • Durable, epoxy coated cast iron construction
  • Motor - 1 Ph or 3 Ph, oil-filled, hermetically-sealed, automatic reset, thermal overload protected (1 Ph).
  • Bearings - Upper and lower ball bearings
  • Stainless steel motor shaft
  • Dual mechanical shaft seals - Upper carbon/ceramic, Lower silicon carbide/carbon. Optional seal materials available
  • Impeller - non-clogging bronze vortex design passes 3/4" (19 mm) spherical solids
  • 25' (8 m), UL listed, 3-wire neoprene cord and plug. Longer cords available in lengths of 35' - 50' (11 m - 15 m)
  • No screens to clog
  • Stainless Steel screws, bolts and handle
  • 1-1/2" NPT discharge with 2" or 3" flange available
  • Corrosion-resistant, powder coated epoxy finish
  • Moisture sensors available for early warning of seal failure (optional)
  • 100% computerized tested

Product Specifications


HERTZ60 Hz 
MOTOR1/2 HP or 1 HP
RPM3450 RPM

Technical Data

SELECTION GUIDE

  1. Single or double piggyback variable level float switch pump control using the 15 amp plug and receptacle. Refer to ZM1536.
  2. Single piggyback variable level float switch, hard wiring the pump lead wires to the float switch leads.
  3. Refer to ZM1342 and select the correct simplex control panel listed for the pump. Refer to ZM1536 and select the desired variable level control switch, 3 required.
  4. Refer to ZM1342 and select the correct duplex control panel listed for the pump. Refer to ZM1536 and select the desired variable level control switch, 3 or 4 required.

Pump Performance Curves

Design Tools