NEW PRODUCT ALERTS! The 6150 and 6260 Series Commercial Duty Effluent and Sewage Pumps are now available! Check out the NEW ZEP Oil Detection System!

X

X6160, X6180 Series

Solids Handling Pumps with Explosion-Proof Motors // Hazardous Location

X6160, X6180 Series

Commercial duty effluent pumps for Class I, Division 1, Group C & D locations

Features and Benefits

APPLICATIONS

  • Industrial dewatering
  • Automotive repair facilities sumps
  • Septic tank effluent
  • Low pressure effluent sewers
  • Quick change oil stations

PUMP:

  • Solids: 3/4” (19 mm) spherical capability
  • Discharge: 1-1/2”, 2” and 3” NPT vertical
  • Seals – Buna-N elastomers. Upper: carbon/stationary ceramic/rotary.  Lower: carbon/stationary silicon carbide/rotary.
  • Construction – cast iron ASTM A-48, Class 30, 30,000# tensile strength, protected with a corrosion-resistant, baked-on epoxy powder coating
  • Seal leak probes
  • Balanced concentric pump housing and impeller
  • Attaching hardware – 304 stainless steel
  • Square ring seals - Viton
  • Impeller – bronze vortex impeller
  • Optional:
    • Additional cord length available
    • Silicon carbide seals
    • Non-sparking rail systems

MOTOR:

  • Stator – Class B & F insulation and lead wires
  • 416 stainless steel motor shaft
  • Oil-filled motor housing
  • Finned cast iron housing for faster heat dissipation
  • Integral overload protection (1 Ph)
  • Thermal sensors with lead wires (3 Ph)
  • Ball bearings – upper and lower high carbon chromium steel
  • FM approved and CSA Certified, Class I, Division 1, Group C & D construction
  • Power cable length – 25’ (8 m)

Note: Product information presented here reflects conditions at time of publication. Consult factory regarding discrepancies or inconsistencies

Product Specifications

  • 25’ (8 m) of heavy duty power cable.
  • Protected cable entrance. Power and sensor leads in one cable.
  • Each conductor is individually sealed to eliminate cord wicking of liquids.
  • Lifting bracket.
  • Oil-filled motor housing assures uniform heat distribution, lubricates bearings and conducts heat for cooler running.
  • Heavy duty motor features ball bearing construction. Class B & F motor insulation.
  • Dual independent seals. Upper: carbon/stationary, ceramic/rotary. Lower:carbon/stationary silicon carbide/rotary.
  • Upper and lower high carbon chromium steel ball bearings.
  • Stainless steel shaft and hardware resists corrosion.
  • Standard: Seal leak detector probes with an external checking circuit.
  • Standard: Thermal sensor protection. 3 Ph motors have two normally closed temperature sensors imbedded in windings. 1 Ph motors have overload protectors.
  • Balanced vortex impeller with top pump-out vanes for seal protection.
  • Concentric case reduces radial loading for longer bearing and seal life.
  • 1-1/2”, 2” and 3” NPT vertical discharge.
  • Units protected with corrosion-resistant, baked-on epoxy powder coating.
  • Finned motor housing for superior heat dissipation.
  • 1-1/4” NPT threads available for cordage protection.
  • Viton square rings.

Technical Data

Caution

Not for use in acidic, methanol or ethyl acetate atmospheres.

Selection Guide

For information on additional Zoeller® Engineered Products refer to catalog on Rail Systems, ZM1347; Control panels ZM1342; Float Switch Brackets and Pump Lifting Cables ZM1328; Check Valves and Piping Accessories ZM1348.