Congrats to Daniel Hamm! WEFTEC 2019 Drone Giveaway winner!

X

7008, 7009, 7010 Grinder Pumps

Grinder Pumps and Systems // Shark® Series

7008, 7009, 7010 Grinder Pumps

1.0, 1.5 & 2.0 HP, single direction grinder pumps. Uniquely designed for residential or commercial use.

Features and Benefits

APPLICATIONS

  • Sanitary sewage
  • Housing developments
  • Pressure sewers

SPECIFICATIONS

PUMP:

  • Nonautomatic or automatic with integral on-off switch
  • cCSAus listed
  • Discharge: 1-1/4” NPT vertical
  • Mechanical seal – silicon carbide/carbon with Buna-N elastomers
  • Construction – cast iron ASTM A-48, Class 30, 30,000# tensile strength
  • Attaching hardware and lifting handle – 304 stainless steel
  • Square ring seals - Viton
  • Impeller – engineered, glass-filled plastic with stainless steel insert and top pump-out vanes
  • Corrosion resistant, epoxy coated finish
  • 440C stainless steel Tri-slice® cutter and plate hardened to Rockwell C55-60
  • Patent 8,562,287 
  • Optional:
    • Extended cord length
    • Silicon carbide/silicon carbide seal
    • Bronze impeller
    • Trimmed impeller (bronze only)
    • Pre-packaged systems
    • Rail systems

 MOTOR:

  • Capacitor start/run motor with integral starting circuit
  • 1 Phase – integral thermal overload
  • Stainless steel motor shaft
  • Stator – Class B insulation and lead wires, Nema B design
  • Housing – Cast iron, oil-filled, protected by cooling fins
  • Upper and Lower Ball Bearings – Dual high carbon chromium steel
  • Power cable length – 20’ (6 m) standard

DIMENSIONS:

  • Height: 18-5/8” (47.3 cm)
  • Major Width: 11-5/8” (29.5 cm)
  • Weight: 88 lbs (40 Kg)

Note: Product information presented here reflects conditions at time of publication. Consult factory regarding discrepancies or inconsistencies.

APPLICATIONS

  • Sanitary sewage
  • Housing developments
  • Pressure sewers

SPECIFICATIONS

PUMP:

  • Nonautomatic or automatic with integral on-off switch
  • cCSAus listed
  • Discharge: 1-1/4” NPT vertical
  • Mechanical seal – silicon carbide/carbon with Buna-N elastomers
  • Construction – cast iron ASTM A-48, Class 30, 30,000# tensile strength
  • Attaching hardware and lifting handle – 304 stainless steel
  • Square ring seals - Viton
  • Impeller – engineered, glass-filled plastic with stainless steel insert and top pump-out vanes
  • Corrosion-resistant, epoxy coated finish
  • 440C stainless steel Tri-slice® cutter and plate hardened to Rockwell C55-60
  • Patent 8,562,287 
  • Optional:
    • Extended cord length
    • Silicon carbide/silicon carbide seal
    • Bronze impeller
    • Trimmed impeller (bronze only)
    • Pre-packaged systems
    • Rail systems

 MOTOR:

  • Capacitor start/run motor with integral starting circuit
  • 1 Phase – integral thermal overload
  • Stainless steel motor shaft
  • Stator – Class B insulation and lead wires, Nema B design
  • Housing – Cast iron, oil-filled, protected by cooling fins
  • Upper and Lower Ball Bearings – Dual high carbon chromium steel
  • Power cable length – 20’ (6 m) standard

DIMENSIONS:

  • Height: 18-5/8” (47.3 cm)
  • Major Width: 11-5/8” (29.5 cm)
  • Weight: 88 lbs (40 Kg)

Note: Product information presented here reflects conditions at time of publication. Consult factory regarding discrepancies or inconsistencies.

Product Specifications

Voltage Ability115 / 200 / 230 / 460 / 575
Phase1 & 3
Hz60
Discharge Size1.25"
Solids HandlingGrinder, Slurry
HP1.0, 1.5, & 2.0
RPM3450
SealsSilicon Carbide/Carbon
O RingsViton
ImpellerEngineered Plastic Vortex